Materials: Tidaholm kitchen cabinets, Metrik handles, solid oak hardwood flooring, ethanol fireplace insert, metal studs, drywall, glass tile
Description: First we built the toe kick for the cabinets out of 1x3 fir.
We used 30x15x24 IKEA cabinets. We only wanted the finished cabinets to be about 18-20 inches deep, so we cut off about 2-3 inches off the backs of the cabinets after they were assembled. Then we set them onto the toe kick and secured everything.
Next we built a bump-out out of metal studs that would house our ethanol fireplace insert.
We were going to clad the fireplace in glass tile, so we spent quite a bit of time calculating where the studs should sit so that after drywall the width and height would add up to the exact with of our 1x2 inch glass tile with 1x1 inch glass tile that would fill in the end of each row.
For a table top we used 3/4 inch solid oak flooring planks on top of sheet of 3/4 inch plywood, then finished the edge with a 1x2 oak piece which makes the table top look extra thick.
We got the Tidaholm cabinet doors when they were being cleared out at 20% off.
Then we had someone come tile it and build a mantel out of a couple of pieces of 1x3 and 1x4 oak. Then I stained the table top and mantel. I used Minwax Ebony stain - 4 layers before it matched the Tidaholm finish. Then two coats of satin poly, For the inside of the fireplace, I mixed drywall mud, fine sand and dark gray paint and troweled it on.
See more of the Tidaholm kitchen cabinet with fireplace.
~ K @ Shift Ctrl ART
